cpu

18/08-2004 à 14:40slt a tous voila j'ai actu un celeron 2ghz mais je trouve ça super lent lol j'aimerais donc acheter un cpu plus rapide mais je ne sais pas quelle puissance je peux donner sans que la carte mere ne debloque (sisoft sandra me dit 3ghz)
fabricant de la carte mère fujitsu siemens modèle D1420 si qlq sais me donner qlq tuyaux....


----------
ptitcul



18/08-2004 à 14:54Tu peux mettre le bios à jour sur cette page, il y a aussi un fichier TXT qui t'indique les modifications apporté au BIOS et certainement le processeur accepté (je n'arrive pas à l'ouvrir tu auras peut être plus de réussite que moi)


@+
Richard


----------
6TEM Pau


cpu
18/08-2004 à 15:27ok mais quelle page???


----------
ptitcul


18/08-2004 à 15:36Oups !
J'ai oublié de collé le lien, je m'en excuse.

ICI : http://www.fsc-pc.de/support/softwarepool_drv.asp?BIOSsb=(602)

@+
Richard


----------
6TEM Pau


18/08-2004 à 15:39J'ai réussi à ouvrir le fichier TXT, voilà, le contenu.

16.10.2002

BIOS - Change V4.06 Release 1.05.1420
====================================================

- Add USB 2.0 wake up code.

- Bug Fix for USB 2.0 card reader. Remove Intel ICH4
workaround for USB EHCI wake up.

- Distinguish between S4 and S5 to avoid that for i.e.
the LAN controller settings in Device Manager will be
overwritten in S4 by BIOS. This should only be done
in S5.

- Adaptations due to the behavior of current hard disks
according with Hard Disk Security.

- Bug Fix: CMOS checksum error after the system is
powered off from the Hard Disk Security setup screen.

- Implemented memory reference code 1.6.

- Phoenix code update for USB & PS2 (Keyboard/Mouse).


====================================================

History-List:
-------------
18.09.2002

BIOS - Change V4.06 Release 1.04.1420
====================================================

- Add workaround for long POST delay with DVD-ROM:
HL-DT-STDVD-ROM GDR8160B.

- Microcode update for Pentium 4 Processor.

- Implemented workaround for onboard graphic under
Windows XP Home to get the setup screen of XP Home
running with 800x600.

- Fixed bug in Cache size determination, which was
shown in BIOS Setup Info Page.

- Changed CPU frequencies, which are displayed in Setup
Info Page to the official frequencies defined by Intel.
Now the frequency on POST screen and in Setup Info Page
are the same.

- Bug Fix: Sporadic hang at POST Code 09h. CNR error
reporting modified.

- Implemented new video bios revision 2709.



27.08.2002

BIOS - Change V4.06 Release 1.03.1420
====================================================

- Improvement: Intel ICH4 Chipset, some code
modification for the CNR detection was made.

- Improvement: Deliver DDR speed instead of frequency.

- Implemented workaround for defective Samsung DVD drive.

- Fix system hang after S3 with HD password enabled.

- Adaptations according to the behavior of current
hard disks.

- Bug Fix: Not correct node of "Silent Mode" from
secondary master hard disk.

- Improvements in "Hard Disk Security" handling.

- Fixed problems with phantom floppy drive in Win9x.

- Bug Fix: Implemented support for boot from CD with
Floppy emulation mode from USB CD-ROM/CD-RW/DVD
drives.

- Removed PS2 PORTSWAP feature.

- Removed workaround for onboard graphic under Windows
XP Home to get the setup screen of XP Home running
with 800x600, because with the current drivers this
issue should be solved.

- Implemented saving LAN Boot-Code during a BIOS update.

- Implemented new video bios 2686.

- Feature added: HDD SMART.

- Fix sporadic system hang with onboard audio disabled.

- Fix occasional system hang at POST code 55h.

- If system switched off via APM call use FSC soft
off procedure. Only with this procedure the wakeup
sources are set correct.

- Reduced reserved size for P6 patches from 5 to 4
because we need the flash space for a new chipset code.

- Microcode update for Pentium 4 Processor. Northwood 0F27
(C1) Patch ID 1Dh.

- Bug Fix: With some new hard drives Win NT4 switch off the
system but scandisk runs during the next power on.

- After the BIOS had tried to boot via LAN using BOOTP
without success, the BIOS didn't find an operating
system on the other boot devices.


28.06.2002

BIOS - Change V4.06 Release 1.02.1420
====================================================

- Checking of the appropriate status of each drive
improved.

- Bug Fix: Print via parallel port (LPT) at DOS not
possible.

- Fixed boot issue for El Torito CDROM's that have
the digital copy permitted bit set.

- Bug Fix: UDMA detection and Cable Reporting don’t
work correct with some drives.

- USB controller 1 disabled (not populated at this
board).

- Improvement: Boot via USB devices "Memorybird
Pro", "Fujitsu Memorybird" and "Pen Drive"
implemented.

- Feature "Setup Password Lock: Extended" in
combination with "Memorybird SystemLock: Enabled"
now working to prevent access to PCI Adapters
option ROMs.

- Bug Fix: Keyboard and mouse locked at Windows ME
with installed SmartCard reader.

- Beep code added, if ECC memory modules are
plugged and system doesn’t boot.

- Fix POST hangs or PCI resource errors with 2GB
RAM installed.

- Unused setup node "Memory Clocks" removed.

- Bug Fix: BIOS workaround to avoid spurious system
wake events (Reboots). Sometimes, system reboots
although the system should shutdown because of
unexpected wake events via AC97 hardware.

- ICH4 Spec update Rev 1.3 implemented which solves
sporadic system hang during reboot caused by
SMBus.

- Fix: FSB frequency of Northwood CPUs is displayed
with 533MHz (instead of 400MHz).

- Bug Fix: CPU not running when system at APM
standby mode.

- Added P4 specific code to improve POST time.

- Intel reference code 1.1 implemented

- Disable COM2 to free resources for not populated
serial interface.

- PC-Lock is removed.

- Fixed bug in CNR card detection because a CNR
primary audio card has not been detected correctly.

- Added Subvendor-/Subsystem ID for Atztech CNR2800-W.

- Added identification for CNR secondary audio cards.
Added AC97 Vendor ID for AC97 modem card.

- Default values of "Parallel Mode" changed to "EPP"
and of "POST Errors" to "No Halt On Any Errors".


08.05.2002

BIOS - Change V4.06 Release 1.01.1420
====================================================

- First released version.


----------
6TEM Pau



18/08-2004 à 15:46Plus récent le mien [:)(]


----------
6TEM Pau


18/08-2004 à 15:50c'est pour flasher le bios ton lien c'est pas ça que je veux image


----------
ptitcul


cpu
18/08-2004 à 15:50 (?) ca m'étonnerait, c la meme source !


----------
image


18/08-2004 à 15:54Regarde ta version : FLASH BIOS UPDATE (D1420) V4.06 R1.03.1420
Et la mienne : BIOS - Change V4.06 Release 1.05.1420

Pour notre ami qui veut changer son proc, sache que le changement de proc demande parfois une maj du BIOS pour accepter la tention du CORE.

@+


----------
6TEM Pau


18/08-2004 à 15:58mettre à jour le bios peut accélerer le cpu (le faire fonctionner correctement en tout cas).


----------
image


Merci de vous identifier

« Forum technique (liste des messages)11 enregistrements / page 1/1