printer
JosephThompson
6 contributions
6 contributions
Membre depuis le 13/09/2023
Envoyé le 13/09/2023 à 09:55 Modifié par JosephThompson
My printer often shows that it cannot connect to the network, but the network is fine. Do I need to replace the printer? I am planning to DIY a 3D printer recently and just bought a Stepper motors.
Our main focus at skysmotor.co.uk is to offer Stepper motors and servo motors through our online platform, with the aim of providing competitive prices a
Bipbipcoyote
4 359 contributions
Membre depuis le 06/03/2001
Envoyé le 13/09/2023 à 11:45 Modifié par Bipbipcoyote
Hi,
The printer must be configured often manually via its dashboard as follows:
- the name of the network named SSID
- a FIXED IP by example 192.168.0.250
- the subnet mask by example 255.255.255.0
- the password
is this really the case ?
maybe the printer automatically returns to factory settings which does not allow it to enter your network
or if you define the allocation of the IP via DHCP it risks receiving a different one each time and your devices no longer detect it, the IP must be FIXED
The printer must be configured often manually via its dashboard as follows:
- the name of the network named SSID
- a FIXED IP by example 192.168.0.250
- the subnet mask by example 255.255.255.0
- the password
is this really the case ?
maybe the printer automatically returns to factory settings which does not allow it to enter your network
or if you define the allocation of the IP via DHCP it risks receiving a different one each time and your devices no longer detect it, the IP must be FIXED
Visitez mon Site Google est mon ami, il répond mieux que moi, posez lui d'abord vos questions
Discussion trop ancienne
Cette discussion a été automatiquement fermée car elle n'a plus reçue de nouveau message depuis trop longtemps.
Nous vous suggérons de créer un nouveau message
2 enregistrements - Page 1/1
« Retour sur la liste des messages de ce forum